***Kit is made from genuine "demilled" USGI
Selector parts. Kit attaches to the stock and not the receiver. ***
Attaches to stock not the receiver!!!!
Note: As there are so many different make receivers out there, the connector arm may have to be cut in order
to facilitate the wider op rod rail on some receivers (Armscorp, Fulton Armory and some late model Springfield ). Although
every effort is made to produce a generic kit that will work with all makes of receivers, some "tweaking" may be
necessary.
Hawk's Full Dummy Selector Kit
New 2008 Prices!| #FDS-Std | your
choice of "demilled" or shortened connector arm
| $55.00 shipped. |
| #FDS-CM | with Pre-Modified Connector arm | $65.00 Temporarily
Discontinued |
This IS my rifle...There are many like it, but this one
IS mine....Note: The standard connector
has only the center lug ground off, where the modified connector arm has the modification done to the front area necessary
for installation, although some minor tweaking may still be necessary.
Wider op rod rail???Request a shortened
connector arm at no extra charge.
Note: The
standard connector has only the center lug ground off, where the modified connector arm has the modification done to the front
area necessary for installation, although some minor tweaking may still be necessary.
Wider op rod rail???Request
a shortened connector arm at no extra charge.
******
What some of our customers have to say about Hawk's kits
" The Sparrowhawk kits
are fun to install and they give the semi-auto M14 the completed, authentic look they deserve". T.C.
Gold Canyon, AZ
If you are looking to reproduce the look of an M-14, this is the only way to go. Hawk Dummy
kits completes the look of any M14. It also is a great way to keep dirt and F.O.D. out of the action. I wouldn't think
of having a G.I. stock with an open selector cut.
G.E.M. Fairfield, California
"I've installed the (dummy) Selector on my M1A.
It's excellent; just what I needed to simulate a M-14 for one of my SEAL film projects." A.M.D., Producer,
UDT-SEAL Museum video project, Miami, FL
"I'm forwarding this picture of my M1A w/your Dummy Selector,
connecting rod assembly. Looks slick as s&^%, especially with the GI birch stock. GO INFANTRY!!!"
J. S. East Douglass, Mass
"I got the dummy setup today. I have installed it
on a birch M14 stock for one of my M1As. It is the neatest thing since sliced bread! Wow! It looks like the real
deal. Hawk, thanks so much. I may have to get another one for the synthetic stock." L. E.,
Las Vegas, Nevada
"I just received and installed Sparrow Hawk's
dummy selector on my Armscorp M-14. Can't say enough about the great look it gives the rifle. If you were considering
some sort of dummy selector I highly recommend Hawk's- It's a little more expensive, but is easily the best of the
lot and customer service is first-rate." D. R., Valrico, FL
"Hey Hawk, I got the package Saturday. I had to "trim"
some and fit the "rig", and I knew I would have to, and it looks great. I mean, it looks great. Makes my other resin
thing look stupid. Now I gotta have another one, for the other rifle." B.S., Champaign, IL
" Best dummy kit I have found, installs easily with only minor fitting,
sure does make the rifle look better. Customer service is excellent and quick."
Rangers Lead The Way J.G., Texas
Important Note:
Make
sure the Connector Arm has enough clearance so as Not to come in contact or interfere with the movement of the Op Rod during
cycling!
