|
"Support
Our Troops" 24/7 
Hawk's M-14 dummy Selector Switch Kit (FDS-S kit) Hawk's FDS, FDS-S are the only dummy kits out there made with Genuine USGI parts and the only
ones that use a genuine full USGI connector arm. "Why settle for less!!!"
Attaches to stock not the receiver.
Installs the same as the standard FDS- kit |
"I've installed the (dummy) Selector
on my M1A. It's excellent; just what I needed to simulate a M-14 for one of my SEAL film projects." A.M.D., Producer,
UDT-SEAL Museum video project, Miami, FL
Due to the increase in cost of USGI parts,
we have no alternative but to raise our prices accordingly.
| #FDS-S-Std | Hawk's Full Dummy Selector Switch Kit w/standard connector arm | $75.00 |
The FDS-S-Kit is made with the shaft welded in place with the switch in the stationary "semi-auto"
position. #FDS-S-BR (NEW) | Same as above only less connector arm | $60.00 |
The above kit is a New option.
Perfect for those who have their own connector arms.
Have a complete set of Selector
parts?
(Sear release, selector switch, spring, shaft and connector arm)
Send them to us and we'll make you a kit for $40 shipped!!!
Above
applies to FDS-S-Std kit only.
Note:The Modified connector arms have been discontinued due to time constraints.
"Sorry, we no longer accept Credit Cards "
Important Note: Make sure the Connector Arm has enough
clearance so as Not to come in contact or interfere with the movement of the Op Rod during cycling!
We've received inquiries as to whether the FDS-kits can be installed on Sage EBR stocks.
The answer is Yes they can! The best procedure to use woiuld be to mark and then drill and tap the holes and use machine screws
to attach (not included)
Photos courtesy of "Harley Rider"
From the M14/M1A Firing Line Forum
Hi Hawk. Received the Dummy Selector today.
Following 3 minutes minor final fitting with a file and 30 seconds to drill 2 holes for the wood screws, the project was complete.
And does it ever look good. Everyone that has seen it is impressed. Thanks, A.H., Shalimar, Fl.
|
