Hawk's newest version of our M14 Dummy KitsTM, the FDS"Ambi"kit,
short for ambidextrous, allows one to decide if they want the button look or the switch look. In addition to the choices,
when electing to use the switch, it actually turns just like the real deal M14 switch, only it does not serve the same function.
Change your mind? Just remove the pin and switch and install the button in it's place and you're good to go. Like
all of Hawk's other kits, it will not make your rifle fire on automatic. It's just a piece of jewelry that attaches
to the stock in the same manner as the rest of his kits.
1- "AMBI" Switch kit
choice of full or shortened connector arm (see link below)
1- Button (selector lock)
1- Extra pin
2- Mounting screws
4- Washers for shims if needed
Note: although the switch is moveable, it does not change
the non-functionality of the kit, nor can it be made to do so.
The "Ambi" kits are normally in
stock and ready to ship! However, Please see "Production Times" for updates.
Kit is $70 Shipped.
All kits are
usually in stock and ready to ship!
*Determining op rod rail width.
Have your own connector arm???
Order the FDS-"AMBI" BR for just $60 shipped.
Have a complete set of selector parts?
Send us the switch, spring, pin, shaft and sear release and we will make you
the above for $45 shipped.
Note: If you prefer not to have a moveable switch, we can
tack weld the shaft to the sear release in the semi position for an additional $5.
kit note: As all M14 Stocks are not created equal, it may be necessary to add shims beneath the base plate in order to ensure
that there is no interference with between the kit and the trigger system.
This site is subject to all copyright and intellectual property
laws. Nothing on this site may be copied via any means, including electronically, without the expressed written consent of
the site owner.
M14 Dummy Selector KitsTM, M14 Dummy KitsTM and Dummy Selector kitsTM are trademarks of SparrowHawkM14.com
Site owned and operated by "Hawk"
a US Marine Corps Veteran.